Crane-Assisted Tree Removal in Canton, OH

Crane-assisted tree removal is a method, not a different result: the tree still comes down in pieces, but each piece is cut while hanging from a crane and then swung over the house to the street or driveway instead of being lowered into the yard. Around Canton it makes sense for a short list of trees: very large maples and oaks leaning over a house, dead ash too brittle to climb, trees in fenced backyards with no side-yard access, and trees that came down in a storm and are resting on a roof.

Why crane work fits older Canton lots

Much of Canton was built out between 1890 and 1950, when the city grew from about 26,000 people to nearly 117,000. Those blocks have narrow lots, detached garages off alleys, close neighbors and trees that have had seventy years or more to grow. A big tree in that setting can have nowhere to drop a limb and no way for a lift to reach it. With a crane parked on the street or driveway, a climber or a lift attaches each section to the crane's line, makes the cut, and the operator lifts it clear of the roof, wires and fences.

When a crane is worth the cost

Cranes are not cheap, so they are used where they save time or reduce risk enough to pay for themselves. That includes trees whose wood cannot be trusted to hold a climber, trees over the house where any dropped piece would cause damage, very large trunks that would take a long day of lowering by rope, and storm-damaged trees under tension. For a mid-size tree with open access, a climber and ropes are usually the cheaper choice, and we will tell you so.

Planning a crane day

The crane needs firm, level ground and room to set its outriggers, usually on the street or a driveway, with no overhead lines in the swing path. In Canton, work that blocks a public street requires notice to the city at least one business day ahead under Section 917.09, so a crane day is planned in advance rather than squeezed in. Soft spring ground, overhead wires and parked cars all factor into where the crane can go.

Cleanup

Sections are set down in a landing area, cut smaller and chipped or loaded. The yard under the tree usually sees far less damage than with a conventional removal, because nothing large has to be dropped.